Micro-Inertial Measurement Unit (IMU chip)
+
  • Micro-Inertial Measurement Unit (IMU chip)

Micro-Inertial Measurement Unit (IMU chip)

Product Features ● Automotive-grade ● Ceramic packaging ● Full temperature compensation ● Integrated inertial sensor ●ASIL B-level functional safety ● High reliability



Performance metrics

Spinning top Accelerometer System
Measurement range ±250 to ±2000 ° /s Measurement range ±2 to ±70 g Supply voltage 3.3V ± 0.15 V
Scale factor (300°/s) 100 LSB/° /s Scale factor (16g) 2000 LSB/g Operating current 6 mA
Nonlinear scale factor ±0.05 % Nonlinear scale factor ±0.5 % Operating temperature range -40~+125 Celsius
Zero bias ≤1 ° /s Zero bias ≤10 mg Shock-resistant ≥2000 g
Zero-bias instability 2 ° /h Zero-bias instability 50 ug Size 5 × 5 × 1.78 mm
Angular Random Walk 0.3 ° /√h Random walk with speed 0.06 m/s/√h Weight 0.2 g
Noise (50Hz/400Hz) 0.1/0.3 ° /s rms Noise (50Hz/400Hz) 2/6 mg RMS Interface Type Safe SPI --
Bandwidth (Filter 1) 50~400 Hertz Bandwidth (Filter 1) 100~400 Hertz      
Bandwidth (Filter 2) 12.5~100 Hertz Bandwidth (filter) 25~100 Hertz      

Application areas

●Inertial Navigation: Intelligent Driving, Integrated Navigation, Platform Stabilization

●Attitude Control: Drones, Mobile Satellite Communications, eVTOL

Main dimensions and interface definitions

Pin Definition Instructions
1 CSB Chip Select Bar
2 SCK SPI serial clock
3 MOSI SPI serial data input
4 MISO SPI serial data output
5 NC No Connection
6 Reset External Reset Signal, Low Active
7 BUS_ID_1 BUS ID1 for Sensor Identification
8 BUS_ID_0 BUS ID0 for Sensor Identification
9 NC No Connection
10 NC No Connection
11 NC No Connection
12 NC No Connection
13 GND Ground
14 VDD Power Supply (+3.3V)
15 DGND Digital Ground
16 VDDIO Chip Digital I/O Supply
Note: The NC pin should be left floating.

Key words:

Online consultation

If you have any questions about our products and services, please contact us!

Submission

recommend products

No relevant data at the moment, please add it backstage!